 |
|
Home > Industries We Serve > Aerospace
 
|
|
In no other industry is reliability more emphasized. The risk associated with the failure of key components is beyond measure.
IMR provides a range of services designed to support both the Quality Control efforts as well as the materials and product engineering efforts of many suppliers of mission critical components.
As a Nadcap Approved laboratory, IMR maintains a strict Quality System with tight control of all aspects of testing from sample tracking and data management to calibration and test methodology. We have extensive experience with reciprocating and turbine engine components and materials, airframe materials (including sealants), and thermal spray coatings. We also carry approvals from many major manufacturers including Pratt & Whitney, Sikorsky, Boeing, GE, Bombardier, Lockheed Martin, Rolls Royce and more.
March 6, 2013 - Come see us at Aeromat in Bellevue, WA from April 2-5, booth number #405!
February 25, 2013 - IMR Test Labs - Suzhou (China) is also now Nadcap approved. This is in addition to our GE S-400 and ISO 17025 accreditations.
February 7, 2013 - IMR's Singapore division is now Nadcap accredited and has received approval for GT 193 code AJ, coatings evaluations. With these two new accreditations, Singapore is now your one-stop aerospace testing facility. Contact us today for more information for you or your partners in Asia!
Contact us today for a quote or more information.
|
| |
AEROSPACE TESTING RELATED PAMPHLETS (.pdf)
|
| |
|
|
|
| |
| Available Testing Services | Composites, Plastics & Polymers |
| | |
| Fatigue Testing | Material Properties |
| Rotating Beam up to | FTIR |
| 1800°F | Material Identification |
| High Cycle | DSC Analysis |
| Low Cycle | Melting Point, Glass |
| Fracture Mechanics | Transition, % Crystallinity |
| | Contaminant Analysis |
| Failure Analysis | Chemical Exposure Testing |
| Corrosion Analysis | Chemical Resistance |
| Root Cause Analysis | |
| | Physical Properties |
| Chemical Analysis | Hardness (Rockwell, |
| Quantitative/Semi- | Durometer,& Barcol) |
| Quant | Coefficient of Thermal |
| Cleanliness Testing | Expansion by TMA |
| SEM/EDS | Heat Aging |
| | Compressive Properties |
| Metallurgical Analysis | Lap Shear Testing |
| Microstructure | Tensile Testing |
| Porosity | Impact Testing |
| Inclusion Rating | |
| Decarburization | Materials Analyzed |
| Microhardness | Thermal Spray Powders |
| (Knoop & Vickers) | Copper Alloys |
| Particle Analysis | Steel Alloys |
| Grain Size | Titanium Alloys |
| Case Depth | Aluminum Alloys |
| Intergranular Attack | Nickel Alloys |
| Residual Stress | Beryllium Alloys |
| Measurements | Unknown Materials |
| Plating & Coating | Magnesium Alloys |
| Analysis | Plastics |
| Composites |
| Mechanical Testing | Ceramics |
| Tensile Testing | Polymers |
| Weld Examination | |
| Hardness (Brinell, | Corrosion Testing |
| Rockwell) | Salt Spray Testing |
| Flexural | Cyclic Corrosion |
| Creep & Stress Rupture | SO2 and SO2/CO2 |
| Strain Gauge | Exposure |
| Measurements | QUV Exposure |
| Hydrogen Embrittlement | Electrical Resistivity |
| Impact Testing | Testing |
| Bond Strength/Adhesion | Taber Abrasion/ |
| | Wear Resistance |
| | |
|
|
|
|
| Accreditations & Approvals* |
| Nadcap (NY, OR, SPR) |
|
ISO 17025 A2LA - (NY, KY, OR, SUZ) SAC (SPR)
|
| GE S-400 (NY, KY, OR, SPR, SUZ) |
|
GT 193 code AJ (SPR)
|
| Pratt & Whitney |
| P&W Test Codes for NY-1, 2, 5, 6, 7, 7a, 7b, 7c, 7d, 7e, 7f, 7g, 7h, 9, 9a, 10, 11, 12, 12a, 13, 14, 15, 20, 21, 22, 25,26, 27, 28, 33 |
| P&W Test Codes for OR- 1, 2, 3, 4, 5, 6, 7, 9(Ti), 11, 12, 12a |
| P&W Singapore Test Codes for SPR - 1, 2, 5, 7a, 7c, 7d, 7h, 9, 12a |
| Sikorsky |
| Boeing |
| Parker Hannifin |
| Schweizer |
| Bombardier Aerospace (Canadair, Learjet) |
| Lockheed Martin |
| Dresser-Rand |
| Goodrich |
| Rolls Royce |
| Hitemco |
*please contact us if you need information on specific accreditations.
|
|
|
|
|
|
