additive-manufacturing-samples-powder-cropped

Additive Manufacturing Materials and Component Testing Services

IMR's Additive Manufacturing testing lab has expanded capabilities in powdered metal characterization, and laser-sintered metal testing & analysis to help manufacturers quickly and accurately make important evaluations for their products design, development and production phases.

For example, IMR provides comprehensive powder analysis to fully characterize the starting powder via test methods such as chemical analysis (ICP-AES, ICP-MS), percent crystallinity testing, particle size testing (Microtrac) and morphology analysis (XRD, SEM and optical). Additionally, we offer density testing to determine how compact the sample has become after bonding, and compression testing to determine how much force a sample can handle. A full list of analytical services offered by IMR for Additive Manufacturing is listed below. Or if you're ready for a quote, click the button below.

Request a Quote


RAW MATERIALS TESTING Services

INCODEMA 3D-AM-POWDER-BEDMany additive manufacturing (AM) challenges are being overcome through the use of materials testing and analysis. This starts with the need for well characterized raw materials such as powders, pastes, and wires. SLS powders especially needs ongoing testing due to the need to reuse unsintered powder without affecting the end product.

 

 

AdobeStock_269901739Additive manufactured component quality requires the analysis of a wide array of properties, based not only on the end use of the part, but also the AM process being used to produce them.  With the push towards lighter, more durable products created with AM technology, supply chains need to insure that their products meet or exceed physical characteristic specifications.

 


 

Additive manufacturing video

IMR Test Labs has extensive experience in providing world-class materials testing and analyses.  This video highlights the main (and specialized) areas of materials testing involved in materials characterization of additive manufacturing powders, wires and finished products. 

IMRTestLabs_PromoVideo_Captioned_Ver2

 


MATERIALS CHARACTERIZATION TESTING Lab Methods

POROSITY

Created when small pockets of air get formed in the body of the part or component being printed. It can be in the form of a process-induced porosity, or a gas-induced porosity. This can lead to cracks and fatigue due to a reduction in the density of the part.
 

DENSITY

This measurement is in a direct inverse relationship with porosity. A reduction in density due to porosity can lead to fatigue and cracking when pressure is applied. An evaluation of Particle Size Distribution is helpful, since a proportional number of small particles can fill in the gaps around the larger particles, reducing porosity and increasing density.

RESIDUAL STRESS

During the metal 3D printing process, residual stress is created due to the inherent heating/cooling cycles, as well as expansion/contraction. Cracking can occur when the residual stress exceeds the printing material’s tensile strength. The most vulnerable location for this issue is the common interface between the part being manufactured and the build plate.

CRACKING

When melted metal solidifies, the risk of cracking increases. Careful monitoring of the energy source to keep its output level consistent and moderate during production/printing will help mitigate the potential for damage. The quality and characteristics of the alloy powder are critical in maintaining the integrity of the printed part. Delaminating can also occur when powder is not melted to an adequate level, or escapes to form a re-melting layer under the melt pool.

FUNCTIONAL STRENGTH

In addition to providing incredible flexibility in design, additive manufactured products need to meet strength and durability standards. Mechanical testing offers a variety of methods.


 

ANALYTICAL SERVICES FOR ADDITIVE MANUFACTURING TESTING

CHEMICAL ANALYSIS

Alloy Chemistry/Verification
Apparent Density
Ash Content
Carney Flow
C, H, O, N, S
Chemical Resistance
Cleanliness Testing
Coating Weight
Contaminant/Corrodent Analysis
Density
DSC Analysis (Melting Point, Glass Transition, % Crystallinity, Degree of Cure, Purity)
Filler Content Analysis
FTIR Analysis
Hall Flow
Halogen Analysis (IC)
Heavy Metal Impurities
Hexavalent Chromium
ICP-AES Analysis
ICP-MS Trace Element Analysis
Ion Chromatography (IC)
Material Certification
Mercury Analysis
Particle Size Analysis Percent
Crystallinity
Phase Identification
Positive Material ID (On-site PMI available)
Powder Diffraction
Precious Metal Assay
Scott Flow
SEM/EDX
Sieve Analysis
Trace Element Analysis
Unknown Material ID
X-Ray Diffraction (XRD)
XRF Chemistry

 

METALLURGICAL ANALYSIS

Aggressive Machining Evaluations
Braze Analysis
Case Depth
Certified Weld InspectionsDecarburization
Failure Analysis
Fractography/Fracture Mechanics
Grain Size
Image Analysis
Inclusion Rating
Intergranular Attack
Intergranular Oxidation
Macroetch/Microetch
Metallography/Materialography
Microhardness (Knoop, Vickers, MacroVickers)
Microstructure
Orientation in Microstructure
Particle Analysis (Distribution, ID, Size)
Phase Volume Determination
Quantitative Image Analysis
Root Cause Evaluation
SEM Analysis
Welder Qualification

MECHANICAL TESTING

Bend Testing (3 Point, 4 Point)
Bond Strength Testing
Charpy Impact Testing (-320°F to 450°F)
Coefficient of Thermal Expansion by TMA
Composite Testing (FRC, CMC)
Creep & Stress Rupture
Fatigue Testing (Axial, Low Cycle, High Cycle, Rotating Beam, Coating Shear)
Flexural Properties (Modulus, Strength, Stress-Strain Response)
Fracture Mechanics
Hardness (Rockwell, Brinell)
Heat Aging
Indentation Toughness
Impact Testing (Charpy, IZOD)
Lap Shear Testing
Open Hole Tension/Compression
Shear Properties
Slow Strain Rate
Taber Abrasion/Wear Resistance
Tensile Testing - Metals (to 2000°F)
Torsional/Axial Fatigue (200 lb)
 
 
 
 
 
 
 
 
 
 
 
 
 

additive-manufacturing-ebook-2020-V8-COVER

 

DOWNLOAD OUR FREE EBOOK- MATERIALS TESTING FOR THE ADDITIVE MANUFACTURING INDUSTRY

TESTING AND ANALYSIS OF RAW MATERIALS AND FINISHED PRODUCTS IDENTIFIES POTENTIAL ISSUES IN PRODUCTION AND FINAL APPLICATION OF PARTS

While Additive Manufacturing is a huge growth industry, new technologies are making the choice for raw materials a more complex decision.  Taking into account design geometries, operating environments and budget concerns, AM companies have a strong need for accurate materials characterizations to enable them to project a part's design viability and operating durability.  

Find out how IMR Test Labs uses a multi-disciplinary approach to Additive Manufacturing testing and analysis.  Click here (or on the button below) to download our eBook.